Description

This is an easy to build kit.

455w Monocrystaline Solar Panel 25 years warranty

100/50 Victron Smart Solar Controller (With Bluetooth) 5 years warranty

2 x 3mtr Solar Cables Red/Black

2 x 1mtr Battery Leads Red/Black

The controller comes prewired, so all you need to do is connect the battery leads to the battery first then attach the Solar Cables to the Solar Panel. That is it.

The solar controller will test the panel for voltage, work out the best way to charge the battery, then it will start to charge the battery.

You can then connect your 12v low voltage appliances either directly to the controller (recommended) or to the battery direct.

Technical Info: If you are using Lead Acid Batteries you can only use 50% of your amperage, so a 220ah battery is only really a 110ah battery. 12v is flat 13.6v is full.

To work out how much potential energy you have stored for through the night you use this maths.

110ah x 12v = 1320w of usable power (don’t forget if you use all 1320w there is no power for the morning, the battery will need to recharge)

Most customers use this for LED lighting and charging Mobile Phones

Quick Maths on using 6 LED Lights each 5w each so 30w total and 1 mobile phone 2.5amp at 5.2v = 13w.

Total usage Per Hour = 43w / 1320w Stored Power, so you could potentially leave the lights on and the phone for 30.69hrs until the battery is flat.

Normally you would only use the lights for 6 hours or so which would leave 24 hours of spare power left in the battery.

(which is enough for 4 days of lighting in bad weather)

We will also give you 30 minutes of training when you come to collect.